Users Guide

Table Of Contents
NOTE: For M1000e version 4.3 and earlier, the active errors are not displayed.
Viewing hardware inventory information for chassis
You can view information about the hardware inventory within the selected chassis. To view the information in this page, ensure
that you run an inventory job and export a CSV file with the component information.
1. In the Home page, click vCenter.
2. In the left pane, under OpenManage Integration, click Dell Chassis.
3. In the left pane, select the corresponding chassis IP.
4. Click the Monitor tab.
To view the relevant component information, navigate through OMIVV:
Table 29. Hardware inventory information (continued)
Hardware
inventory:
Component
Navigation through OMIVV Information
Fans Use either of the following
methods:
In the Overview tab, click
Fans.
In Monitor tab, expand the
left pane, click Hardware
Inventory, and then click
Fans.
Information about fans:
Name
Present
Power State
Reading
Warning Threshold
Critical Threshold
Minimum
Maximum
Power supplies Use either of the following
methods:
In the Overview tab, click
Power Supplies.
In the Monitor tab, expand
the left pane, click Hardware
Inventory, and then click
Power Supplies.
Information about power supplies:
Name
Capacity
Present
Power state
Temperature
sensors
Use either of the following
methods:
In the Overview tab, click
Temperature Sensors.
In the Monitor tab, expand
the left pane, click Hardware
Inventory, and then click
Temperature Sensors.
Information about temperature sensors:
Location
Reading
Warning threshold
Maximum
Minimum
Critical threshold
Maximum
Minimum
NOTE: For PowerEdge M1000e chassis, information about the
temperature sensors is displayed only for chassis. For other
chassis, information about the temperature sensors is displayed
for chassis and associated modular servers.
I/O modules Use either of the following
methods:
In Overview tab, click I/O
Modules.
Information about I/O modules:
Slot/Location
Present
Name
86 Chassis management