Users Guide

The NTP Servers window is displayed.
4. To add the NTP server IP or host name, click the Add button, and then press TAB.
5. Click Time Zone, select the applicable time zone, and then click OK.
Rebooting virtual appliance
1. Open the virtual machine console. See Opening vSphere client console.
2. Click Reboot Appliance.
3. To reboot the appliance, click Yes, or to cancel, click No.
Resetting virtual appliance to factory settings
1. Open the virtual machine console. See Opening vSphere client console.
2. Click Reset Settings.
The following message is displayed:
All the settings in the appliance will be Reset to Factory Defaults and the appliance
will be rebooted. Do you still wish to continue?
3. To reset the appliance, click Yes, or to cancel, click No.
If you click yes, the OMIVV appliance is reset to the original factory settings and all other settings and existing data is lost.
NOTE:
When the virtual appliance is reset to factory settings, any updates that you had done on the network configuration
are preserved; these settings are not reset.
Logging out from vSphere console
To log out from the vSphere console, click Log out.
Read-only user role
There is a read-only unprivileged user role with shell access for diagnostic purposes. The read-only user has limited privileges to
run the mount. The read-only user's password is set as readonly. The user’s password for the read-only user role was same as
admin password in earlier OMIVV versions (OMIVV version 1.0 to version 2.3.1) and is changed from OMIVV version 3.0 onwards
for security purposes.
22
About Administration Console