Users Guide

Table 22. Storage details for a data center and cluster (continued)
Storage: disks Description
○ Write Cache Enabled Protected
○ Write Cache Disabled
● Disk Cache Policy—displays the default cache policy supported by the
controller. The options include:
○ Enabled—cache I/O
○ Disabled—direct I/O
Viewing additional hardware details for data center and clusters
You can view the firmware, power monitoring, warranty status details for a data center and cluster on the Dell EMC
Datacenter/Cluster Information tab. For information to appear on this page, run an inventory job. The data center and
cluster pages enable you to export information to a CSV file and offers filter/search functionality on the data grid. The hardware
views directly report the data from OMSA and iDRAC. See Running an inventory job now.
1. In OpenManage Integration for VMware vCenter, in the Navigator pane, click vCenter.
2. Click Datacenters or Clusters.
3. In the Objects tab, select the specific data center or cluster for which you want to view the host component details.
4. In the Monitor tab, select the Dell EMC Datacenter/Cluster Information tab.
On the <Component Name> subtab, view the following information for each of the components:
Table 23. Single host information (continued)
Component Information
Firmware
● Host—displays the name of the host
● Service Tag—displays the service tag of the host
● Name—displays the name of all the firmware on this
host
● Version—displays the version of all the firmware on this
host
Power Monitoring
NOTE: To display the full list of details, select a specific
host from the data grid.
● Host—displays the name of the host
● Service Tag—displays the service tag of the host
● Current Profile—displays power profile to maximize
your system’s performance and conserve energy
● Energy Consumption—displays the energy
consumption of the host
● Peak Reserve Capacity—displays the peak power
reserve capacity
● Power Budget—displays the power cap for this host
● Warning Threshold—displays your system's configure
maximum value for temperature probe warning threshold
● Failure Threshold—displays your system's configure
maximum value for temperature probe failure threshold
● Instant Reserve Capacity—displays the host
instantaneous headroom capacity
● Energy Consumption Start Date—displays the date
and time when the host began to consume power
● Energy Consumption End Date—displays the date and
time when the host stopped to consume power
● System Peak Power—displays the host peak power
● System Peak Power Start Date—displays the date
and time when the host peak power started
● System Peak Power End Date—displays the date and
time when the host peak power ended
● System Peak Amps—displays the hosts peak amps
66
Inventory and warranty management