Users Guide

Table 22. Storage details for a data center and cluster (continued)
Storage: disks Description
○ UNSUPPORTED
NOTE: For more information about the meaning of these alerts, see the Dell
EMC OpenManage Server Administrator Storage Management User's Guide
at dell.com/support
● Model Number—displays the model number of the physical storage disk
● Last Inventory—displays the day, month, and time of the last inventory that
was run
● Status—displays the host status
● Controller ID—displays the controller ID
● Connector ID—displays the connector ID
● Enclosure ID—displays the enclosure ID
● Device ID—displays the device ID
● Bus Protocol—displays the bus protocol
● Hot Spare Type—shows the hot spare type. The options include:
○ No—there is no hot spare
○ Global—unused backup disk that is part of the disk group
○ Dedicated—unused backup disk that is assigned to a single virtual disk.
When a physical disk in the virtual disk fails, the hot spare is enabled to
replace the failed physical disk without interrupting the system or requiring
your intervention
● Part Number—displays the storage part number
● Serial Number—displays the storage serial number
● Vendor Name—displays the storage vendor name
Virtual Disk
● Host—displays the name of the host
● Service Tag—displays the service tag of the host
● Name—displays the name of the virtual disk
● Physical Disk—displays on which physical disk the virtual disk is located
● Capacity—displays the capacity of the virtual disk
● Layout—displays the layout type of the virtual storage. This means the type of
RAID that was configured for this virtual disk
● Last Inventory—displays the day, date and time the inventory was last run
● Controller ID—displays the controller ID
● Device ID—displays the device ID
●
Media Type—displays either SSD or HDD
● Bus Protocol—displays the technology that the physical disks included in the
virtual disk are using. The possible values are:
○ SCSI
○ SAS
○ SATA
● Stripe Size—displays the stripe size, which provides the amount of space that
each stripe consumes on a single disk
● Default Read Policy—displays the default read policy supported by the
controller. The options include:
○ Read-Ahead
○ No-Read-Ahead
○ Adaptive Read-Ahead
○ Read Cache Enabled
○ Read Cache Disabled
● Default Write Policy—displays the default write policy supported by the
controller. The options include:
○ Write-Back
○ Force Write Back
○ Write Back Enabled
○ Write-Through
Inventory and warranty management
65