Install Guide

● バックアップおよび復元の設定
● 自動バックアップのスケジュール
● 即時バックアップの実行
● バックアップからのデータベースの復元
● バックアップおよび復元設定のリセット 、p. 39
OMIVV で、次の手順を実行して、管理コンソールから［［バックアップおよび復元設定］］ページにアクセスします。
1. https:\\<ApplianceIP|hostname>に移動します。
2. ［ログイン］ ダイアログボックスにパスワードを入力します。
3. 左ペインで、［バックアップと復元］をクリックします。
Configure backup and restore
The backup and restore function backs up the OMIVV database to a remote location (NFS and CIFS) from which it can be restored later.
The profiles, configuration, and host information are in the backup. It is recommended that you schedule automatic backups to guard
against data loss.
The following settings are saved and restored:
● Profiles
● Host inventory details
● OMIVV license
● vCenter appliance settings configured in OMIVV
● HTTP or HTTPS proxy
● Deployment mode
● Extended monitoring
● Alert management
● Backup and restore
● PHA enablement using Dell provider
The following settings are not saved and restored:
● Configuration made at virtual console (such as network configuration, time configuration, and password )
● Alerts and tasks posted to vCenters
● Alarms customization made at vCenter
● Certificates
● General settings configured at Dell EMC Administration console
● NTP settings
● Customization or setting on failure conditions for PHA
1. On the BACKUP AND RESTORE SETTINGS page, click Edit.
2. On the highlighted SETTINGS AND DETAILS area, do the following:
a. In Backup Location, type the path of the backup files.
b. In Username, enter the username.
c. In Password, enter the password.
d. In Enter the password used to encrypt backups, type the encrypted password in the box.
The encryption password can contain alphanumeric characters and the following special characters: @[]{}_+,-.:=.
e. In Verify Password, retype the encrypted password.
f. To validate the backup location and encrypt backup password, click Test.
3. To save these settings, click Apply.
4. Configure the backup schedule. See Scheduling automatic backups.
After this procedure, configure a backup schedule.
NFS 要件
NFS の構成に際して、OMIVV については次の設定が必要です。
● NFS に対する読み取り/書き込み権限があることを確認します。
● Windows 共有に関して、［［NFS 共有の詳細］］ウィンドウで次の手順を実行します。
38 OMIVV アプライアンスとリポジトリーの場所のアップグレード