Users Guide

Resolution: 11G servers are not supported with OMIVV 5.0. Manually remove the unsupported 11G hosts from the host credential
profile.
Version Affected: 5.0
Unable to launch vCenter from flex client after upgrading the
OMIVV appliance
Resolution: See VMware KB article for resolution: https://kb.vmware.com/s/article/54751.
Version affected: 5.0
When adding or removing network adapters to OMIVV, the existing
NICs disappear from the OMIVV console
Sometimes, when you add or remove a network adapter to the OMIVV appliance by using the vSphere Client, the existing NICs
disappear from the OMIVV console.
Workaround: Perform any one of the following tasks:
1. a. Remove all the work adapters from the terminal console utility.
b. Shut down the appliance
c. Remove the network adapters from the appliance.
d. Reboot the OMIVV appliance.
e. Shut down the appliance
f. Add the required network adapter (s) and complete the network adapters configuration.
g. Reboot the appliance.
2. a. Back up OMIVV from Admin Portal
b. Create an OMIVV appliance.
c. Shut down the appliance
d. Add the required network adapter (s) and complete the network adapters configuration.
e. Reboot the appliance.
f. Restore the latest backed up data.
Version Affected: OMIVV 5.0
After adding or removing the second NIC, the Network
Configuration page shows three NICs
After you add or remove a NIC from the OMIVV appliance using the vSphere client, once you boot the OMIVV appliance and log
in to the OMIVV terminal console, sometimes the Network Configuration page shows inconsistent number of NICs.
Resolution: Use the MAC address to compare and configure the correct NIC and use the – button to remove the extra NICs.
Version Affected: 5.0
A server with Unknown status in the earlier version is not listed on
the Bare-metal Servers page after backing up and restoring to a
latest OMIVV version
After restoring a backup from earlier versions, unsupported servers (11G and earlier) are removed from the bare-metal
inventory. Servers whose generation has not been determined by the earlier version before the backup will also be removed.
Frequently Asked Questions-FAQ
159