Install Guide

a. Click the IPv4 Settings tab, select Manual from the Method drop-down list, and click Add.

NOTE:

If you select Automatic (DHCP), do not enter any IP address because the OMIVV appliance will automatically

receive IP from the DHCP server during the next restart.

b. Enter a valid IP, netmask (in the Classless Inter-Domain Routing (CIDR) format), and gateway information.

If you enter an IP address in the Netmask box, it is automatically converted to its respective CIDR format.

c. Enter the DNS server IP and domains to be searched for respectively in the DNS Servers and Search Domains boxes

respectively.

d. Select the Require IPV4 addressing for this connection to complete check box and click Save.

Install and configure OMIVV