Users Guide

"host": "host-16",
"type": "HOST",
"check_statuses": [
{
"check":
{
"name":
{
"args": [],
"default_message": "Host Hardware support check.",
"id": "com.vmware.vcIntegrity.lifecycle.ClusterHealthCheckTask.HwSupportCheck.Name"
},
"description":
{
"args": [],
"default_message": "Checks if the hardware update can be performed.",
"id": "com.vmware.vcIntegrity.lifecycle.ClusterHealthCheckTask.HwSupportCheck.Description"
},
"check": "com.vmware.vcIntegrity.lifecycle.ClusterHealthCheckTask.HwSupportCheck"
},
"issues": [
{
"args": [],
"default_message": "[vCenter: jpvc7dot0d5-2.sped.bdcsv.lab][Cluster:
R6415_vSAN_AllFlash_ESXi7.0RC+][Host: 100.100.10.154][Update PreCheck Task] System Lockdown
Mode is turned On for iDRAC IP, 172.20.5.5; hence Firmware update cannot continue.",
"id": "[vCenter: jpvc7dot0d5-2.sped.bdcsv.lab][Cluster: R6415_vSAN_AllFlash_ESXi7.0RC+][Host:
100.100.10.154][Update PreCheck Task] System Lockdown Mode is turned On for iDRAC IP,
172.20.5.5; hence Firmware update cannot continue."
}
],
"status": "ERROR"
}
],
"status": "ERROR"
},
{
"host": "host-19",
"type": "HOST",
"check_statuses": [],
"status": "OK"
},
{
"host": "host-13",
"type": "HOST",
"check_statuses": [],
"status": "OK"
},
補救叢集
命令：POST https://{{VC IP/FQDN}/}}/api/esx/settings/clusters/{cluster ID}/software?vmw-task=true&action=apply
{
"accept_eula" : true
}
說明：將與給定叢集相關聯的所需狀態套用至叢集內主機。
HTTP 回應代碼：200。如需所有回應代碼的清單，請參閱 回應代碼 第頁的 152。
範例回應：
{task-id}
主機管理 125