Users Guide

},
{
"host": "host-16",
"type": "HOST",
"check_statuses": [
{
"check":
{
"name":
{
"args": [],
"default_message": "Host Hardware support check.",
"id": "com.vmware.vcIntegrity.lifecycle.ClusterHealthCheckTask.HwSupportCheck.Name"
},
"description":
{
"args": [],
"default_message": "Checks if the hardware update can be performed.",
"id": "com.vmware.vcIntegrity.lifecycle.ClusterHealthCheckTask.HwSupportCheck.Description"
},
"check": "com.vmware.vcIntegrity.lifecycle.ClusterHealthCheckTask.HwSupportCheck"
},
"issues": [
{
"args": [],
"default_message": "[vCenter: jpvc7dot0d5-2.sped.bdcsv.lab][Cluster:
R6415_vSAN_AllFlash_ESXi7.0RC+][Host: 100.100.10.154][Update PreCheck Task] System Lockdown
Mode is turned On for iDRAC IP, 172.20.5.5; hence Firmware update cannot continue.",
"id": "[vCenter: jpvc7dot0d5-2.sped.bdcsv.lab][Cluster: R6415_vSAN_AllFlash_ESXi7.0RC+][Host:
100.100.10.154][Update PreCheck Task] System Lockdown Mode is turned On for iDRAC IP,
172.20.5.5; hence Firmware update cannot continue."
}
],
"status": "ERROR"
}
],
"status": "ERROR"
},
{
"host": "host-19",
"type": "HOST",
"check_statuses": [],
"status": "OK"
},
{
"host": "host-13",
"type": "HOST",
"check_statuses": [],
"status": "OK"
},
클러스터 문제 해결
명령: POST https://{{VC IP/FQDN}/}}/api/esx/settings/clusters/{cluster ID}/software?vmw-task=true&action=apply
{
"accept_eula" : true
}
설명: 지정된 클러스터와 관련된 원하는 상태를 클러스터에 있는 호스트에 적용합니다.
HTTP 응답 코드: 200 모든 응답 코드의 목록은 응답 코드을(를) 참조하십시오.
예제 응답:
{task-id}
호스트 관리 123