Users Guide

Gateway
Preferred DNS Server
Alternate DNS Server
Local Access Configuration
Quick Sync Hardware Present
LCD Present
LED Present
KVM Enabled
NOTE: Few attributes of network-related information of a member chassis which is part of the MCM configuration is
not displayed in the Management Controller section.
View storage inventory information
You can view the storage-related information for the selected chassis.
1. On the OMIVV home page, click Hosts & Chassis > Chassis > Chassis List.
The Dell EMC Chassis page is displayed.
2. Select a chassis, click the Service Tag link.
The Overview page is displayed.
3. On the Overview page, click Storage.
The following information about storage is displayed:
Virtual Disks
Physical Disks
Controllers
Enclosures
Hot Spares
For MX chassis, the following information is displayed:
Slot Number
Slot Name
Model
Service Tag
Firmware version
Asset Tag
Power State
Assignment Mode
For MX chassis, if you want to view information about drives, click storage sled. The following drive information is displayed in the
lower pane:
Health
State
Slot
Slot Assignment
Disk Name
Capacity
Bus protocol
Media
If a disk in the PowerEdge MX chassis is unassigned, its slot assignment is shown as NA.
For M1000e chassis, if you have a storage module, the following storage details are displayed in a grid view without any additional
information:
Name
Model
Service Tag
IP Address (Link to storage)
Fabric
Group Name
94
Chassis Management