Users Guide

3. To enable the System Lockdown Mode, click Turn On. This option restricts changes to the System configurations (including firmware
and BIOS version) in the system.
4. To disable the System Lockdown Mode, click Turn Off. This option enables changes to the System configurations (including firmware
and BIOS version) in the system.
If you try to configure the System Lockdown Mode for 13G and earlier PowerEdge servers, you are prompted with a message that this
feature is not supported on this platform.
5. Click OK.
A job is successfully created for the configuring System Lockdown Mode. To check the job status, go to Jobs > System Lockdown
Mode. For more information about System Lockdown Mode job, see System Lockdown Mode jobs.
Host Management 127