Users Guide

The count of the components that is based on criticality status such as Urgent, Recommended, Optional, and Downgrades are
displayed.
The components which have lower version than the available version in the catalog, or it is in the same level (Up-to-Date), or
scheduled for an update cannot be selected. To select the components which have lower version than the available version, select the
Allow Firmware downgrade check box.
To select all the firmware components across all the pages, click .
To clear all the firmware components across all the pages, click .
9. On the Schedule Updates page, enter the firmware update job name and description. The description is an optional field.
The firmware update job name is mandatory. If you purge the firmware update job name, you can reuse the job name again.
10. Under the Additional Settings section, do the following:
a) Enter the Maintenance Mode timeout value between 60–1440 minutes. If the wait time goes beyond the specified time, the
update jobs fail and enter maintenance task will be canceled or time out. However, the components may get updated automatically
when the host is restarted.
b) From the Enter Maintenance Mode Option drop-down menu, select an appropriate data migration option. For more information
about the data migration option, see the VMware documentation.
NOTE: Enter maintenance mode task fails if the cluster configuration does not support full data migration or the
storage capacity is insufficient.
By default, the following options are selected:
• Exit maintenance mode after firmware update completes—If you disable this option, host remains in maintenance mode.
• Move powered-off and suspended virtual machines to other hosts in cluster—Disabling this option disconnects VM
until the host device is online.
c) If you have issues while updating the firmware, select the Delete Job Queue and Reset iDRAC check box. This may result in
successful completion of the update process. This increases the overall update time that is required for job completion, cancels any
pending jobs or activities that are scheduled on the iDRAC, and resets the iDRAC.
For hosts managed using chassis credential profile, delete job queue is not supported.
By default, the Check Prerequisites option is selected.
11. Under the Update Schedule section, select any one of the following options:
• Update Now
• Schedule Update
• Apply Updates on Next Reboot
12. On the Review Summary page, review the firmware update information, and then click FINISH.
The firmware update jobs can take up to several hours depending on the components and number of servers selected. You can view
the status of the jobs on the Jobs page.
After firmware update task is complete, the inventory runs automatically on the selected hosts and hosts exit automatically from
maintenance mode that is based on an option that is selected in the Schedule Updates page.
Creating catalog in Dell EMC Repository Manager (DRM) using
OMIVV
This section describes the process to create a catalog in DRM version 3.0 and later.
1. Go to Download DRM and download DRM.
2. On the DRM home page, click Add New Repository.
The Add Repository window is displayed.
3. In the Add Repository window, do the following:
a. Enter Repository Name and Description.
b. From the Base Catalog drop-down menu, select a catalog.
c. From the Integration Type drop-down menu, select OpenManage Integration for VMware vCenter.
4. In the OpenManage Integration for VMware vCenter window, enter Virtual Appliance IP, vCenter Server IP, Username, and
Password, and click Connect.
The created catalog is displayed on the home page.
5. To export the catalog, select a catalog and click Export.
Host Management
113