Users Guide

Information Description
Stripe Size—displays the stripe size, which is the amount of space that each
stripe consumes on a single disk.
Bus Protocol—displays the technology that the physical disks in the virtual drive
are using. The possible values are:
SCSI
SAS
SATA
Default Read Policy—displays the default read policy that is supported by the
controller. The options include:
Read-Ahead
No-Read-Ahead
Adaptive Read-Ahead
Read Cache Enabled
Read Cache Disabled
Default Write Policy—displays the default write policy that is supported by the
controller. The options include:
Write-Back
Force Write Back
Write Back Enabled
Write-Through
Write Cache Enabled Protected
Write Cache Disabled
Cache Policy—displays if cache policy is enabled.
Physical Disks
When you select this option from the View
drop-down menu, the Filter drop-down list is
displayed.
The following options are available in the filter:
All Physical Disks
Global Hot Spares
Dedicated Hot Spares
The last option displays custom name of
the virtual drives.
Name—displays the name of the physical disk.
Device FQDD—displays the device FQDD.
Capacity—displays the physical disk capacity.
Disk Status—displays physical disk status. The options include:
ONLINE
READY
DEGRADED
FAILED
OFFLINE
REBUILDING
INCOMPATIBLE
REMOVED
CLEARED
SMART ALERT DETECTED
UNKNOWN
FOREIGN
UNSUPPORTED
Configured—displays whether the disk is configured.
Hot Spare Type(Not applicable for PCIe)—shows the hot spare type. The options
include:
No—there is no hot spare.
Global—an unused backup disk that is part of the disk group
Dedicated—an unused backup disk that is assigned to a single virtual drive.
When a physical disk in the virtual drive crashes, the hot spare is enabled to
replace the failed physical disk without interrupting the system or requiring your
intervention.
Virtual Disk—displays the name of the virtual drive.
Bus Protocol—displays the bus protocol.
Controller ID—displays the controller ID.
Media Type—displays either SSD or HDD.
Host Management
103