Users Guide

Information Description
• NUMA Enabled and Protected: This value indicates that the
system is supported and the operating system version is ESXi
5.5 or later and the memory operational mode in BIOS is set
to NUMA.
• Enabled and Not Protected: This value indicates that it
supports the system with operating system version lesser
than ESXi 5.5.
• Disabled: This value indicates that it supports valid systems
with any operating system version and the memory
operational mode in BIOS is not set to FRM.
• Blank: If memory operational mode in BIOS is not supported,
the FRM attribute is not displayed.
System Lockdown Mode Displays the status of the iDRAC Lockdown Mode for iDRAC 8
and later servers. A closed lock represents the iDRAC Lockdown
Mode is turned on whereas an opened lock represents the iDRAC
Lockdown Mode is turned off.
Identification
Displays the following:
• Hostname—Displays name of the OMIVV-managed host
• Power State—Displays if power is ON or OFF.
• iDRAC IP—Displays the iDRAC IP address
• Management IP—Displays the management IP address
• Host Credential Profile—Displays the host credential profile
name for this host
• Model—Displays the Dell EMC server model
• Service Tag—Displays the Service tag for the server.
• Asset Tag—Displays the Asset tag
• Warranty Days Left—Displays the days left for the warranty
• Last Inventory Scan—Displays the date and time of the last
inventory scan
Hypervisor & Firmware
Displays the following:
• Hypervisor—Displays the Hypervisor version
• BIOS Version—Displays the BIOS version
• Remote Access Card Version—Displays the remote access
card version
Management Consoles Displays a link to launch the Remote Access Console (iDRAC).
Host Actions To blink at various time intervals, set up the physical server to
blink at various time intervals. See Set up blink indicator light.
Table 13. OMIVV host health
Information Description
OMIVV Host Health Component health is a graphical representation of the status of
all major host server components: Server Global status, Server,
Power supply, Temperature, Voltages, Processors, Batteries,
Intrusion, Hardware log, Power management, Power, and
Memory. The chassis health parameters are applicable for models
VRTX version 1.0 and later, M1000e version 4.4 and later. For
versions less than 4.3 only two health indicators are displayed,
namely Healthy and Warning or Critical (Inverted triangle with an
exclamatory mark in orange color). The overall health indicates
the health that is based on the chassis with the least health
parameter. The options include:
• Healthy (green check mark)—component operating normally
100 Host Management