Install Guide

Typically, the network that you have configured as the default gateway does not require any manual route configuration because

the gateway is capable of providing the reachability. However, for networks where default gateway is not configured (the Use

this connection only for resources on its network check box is selected), a manual route configuration may be required.

Because the default gateway is not configured for this network to reach external networks, manual routing configurations are

required.

NOTE:

Incorrect routing configuration may abruptly stop the network interface from responding. Ensure to

configure the routing entries appropriately.

g) Click OK.

10. Click Save . To configure another NIC, repeat the tasks 6–10.

11. Go to the OpenManage Integration for VMware vCenter Virtual Appliance Setup utility, click Reboot Appliance. The network

configuration is complete only after restarting the OMIVV appliance.

After the appliance is successfully restarted, the NICs start working as configured. The status of NICs can be viewed by logging in as

readonly user and running the following commands: ifconfig, ping, and route -n.

Change OMIVV appliance password

You can change the OMIVV appliance password in the vSphere Client by using the console.

1. Open the OMIVV web console.

2. In the OpenManage Integration for VMware vCenter Virtual Appliance Setup utility, click Change Admin Password.

3. In the Current Password text box, enter the current admin password.

The admin password should be at least eight characters and should include one special character, one number, one uppercase, and

one lowercase letter.

4. Enter a new password in the New Password text box.

5. Retype the new password in the Confirm New Password text box.

Install and configure OMIVV