Users Guide

The following information is displayed:

● Overview

● Hardware Inventory

● Storage

● Firmware

● Power Monitoring

● Warranty

● System Event Log

When the hosts are managed using the chassis credential profile, the firmware inventory data show few extra components

such as Lifecycle Controller and Software RAID.

NOTE: Inventory job for hosts exceeding the license limit is skipped and marked as Failed.

7. On the Summary page, in the OMIVV Hosts Information section, you can also perform the following actions:

● Launch Remote Access Console (iDRAC)

● Blink Server LED Indicator

● Configure System Lockdown Mode

When the hosts are managed using chassis, Configure System Lockdown Mode is not supported.

● Run Firmware Update Wizard

Related information

View host inventory job on page 74

Modify host inventory job

After associating hosts to a Host Credential Profile, you must periodically schedule inventory to ensure that inventory

information of hosts is up-to-date. Inventory Jobs displays the status of inventory jobs that are run on the hosts.

You can also modify the inventory schedule from the Settings > Inventory Retrieval page.

1. On the Jobs page, select a vCenter instance, and click .

The Inventory Data Retrieval dialog box is displayed.

2. Under the Inventory Data section, do the following:

a. Select the Enable Inventory Data Retrieval (Recommended) check box.

b. Select the inventory data retrieval day and time, and click APPLY.

c. To reset the settings, click CLEAR.

To run the inventory job now, on the Jobs page, click

NOTE:

For servers that do not have an iDRAC Express or Enterprise license, the inventory fails because the license

upgrade is required for iDRAC.

NOTE: When you run a modular host inventory, the corresponding chassis are discovered automatically. The chassis

inventory runs automatically after host inventory if chassis is part of a chassis credential profile.

View chassis inventory job

The Chassis Inventory page displays information about the latest inventory job run on a chassis that is associated to a chassis

credential profile.

1. On the OMIVV home page, click Jobs > Invnetory > Chassis Inventory.

2. To view the chassis inventory information, select a chassis.

● Chassis IP—The IP address of the chassis

● Service Tag—The Service Tag of the chassis The Service Tag is a unique identifier that is provided by the manufacturer

for support and maintenance.

● Status—The status of the chassis

Manage jobs