Manualshelf

Users Guide

ManualsBrandsDell ManualsAnalyticsOpenManage Integration for VMware vCenter Version 5.0
51525354555657585960
3. Click Back, and click Remote Enablement.
4. Set Enable Auto-Discovery as Enabled and Provisioning Server as the IP address of the OMIVV.
5. Save the settings.
The server is auto that is discovered upon next server boot. After successful auto discovery, the root user gets enabled, and
the Enable Auto-Discovery flag is disabled automatically.
Manual discovery of bare-metal servers
You can manually add a bare-metal server that is not added using the auto discovery process. Once added, the server is
displayed in the list of servers on the Bare-metal Servers page.
1. On the OMIVV home page, click Compliance & Deployment > Deployment > DISCOVER.
The Add Server dialog box is displayed.
2. In the Add Server dialog box, do the following:
a. In the iDRAC IP Address box, enter an iDRAC IPv4.
b. Enter the iDRAC credentials.
3. Click OK.
Adding server may take a few minutes.
When the discovery operation is in progress, you can close the Add Server page. Discovery process proceeds in the
background. The discovered server is displayed on the Bare-metal Servers page. The time out value for the manual
discovery is set to 15 minutes.
To view more information about the bare-metal server, select a server. The information such as license expiry, BIOS version,
and system lockdown mode are displayed in the lower-most horizontal pane of the page.
Related concepts
Auto discovery on page 53
Related tasks
Remove bare-metal servers on page 55
Refresh bare-metal servers on page 56
Related information
Remove bare-metal servers on page 55
Refresh bare-metal servers on page 56
Remove bare-metal servers
You can manually remove a server that has been auto that is discovered or manually added.
1. On the OMIVV home page, click Compliance & Deployment > Deployment > DELETE.
2. Select a bare-metal server, and then click OK.
Related concepts
Auto discovery on page 53
Related tasks
Manual discovery of bare-metal servers on page 55
Refresh bare-metal servers on page 56
Related information
Manual discovery of bare-metal servers on page 55
Refresh bare-metal servers on page 56
Deployment
55