Users Guide
Table 14. Hardware information for a single host (continued)
Hardware:
Component
Information
○ CONVERTER
○ REGULATOR
○ AC
○ DC
○ VRM
● Location—displays the location of the power supply, such
as slot 1.
● Output (Watts)—displays the power in watts.
Memory
● Memory Slots—displays the Used, Total, and Available
memory count.
● Memory Capacity—displays the Installed Memory, Total
Memory Capacity, and Available Memory.
● Slot—displays the DIMM slot.
● Size—displays the memory size.
● Type—displays the memory type.
NICs
● Total—displays the total count of available network
interface cards.
● Name—displays the NIC name.
● Manufacturer—displays only the manufacturer name.
● MAC Address—displays the NIC MAC address.
PCI Slots
● PCI Slots—displays the Used, Total, and Available PCI
slots.
● Slot—displays the slot.
● Manufacturer—displays the manufacturer name of the
PCI slot.
● Description—displays the description of the PCI device.
● Type—displays the PCI slot type.
● Width—displays the data bus width, if available.
Remote Access Card
● IP Address—display the IP address for the remote access
card.
If you are managing hosts using unified IP address, the
iDRAC IP is not displayed in this section.
● MAC Address—displays the MAC address for the remote
access card.
● RAC Type—displays the type of the remote access card.
● URL—displays the live URL for the iDRAC associated with
this host.
View storage information of a host
You can view the count of Virtual Disks, Controllers, Enclosures, and associated Physical Disks with the Global Hot Spares, and
Dedicated Hot Spare. To view more information about each of the storage components, from the View drop-down menu, select
the specific component.
For hosts managed using chassis, the complete storage information that is Controller, Enclosures, Global Hot Spare, and
Dedicated Hot Spare are not displayed.
NOTE:
When the hosts are managed by using chassis profile, if you click Storage, and then select the following from the
View drop-down menu:
● Enclosures—The Controller ID of the storage enclosure is displayed as 0 instead of the correct Controller ID.
● Physical Disks—The media type for HDD is displayed as Magnetic Drive instead of Hard Disk Drive.
112 Host Management