Users Guide

Table 13. OMIVV host health
Information Description
Power, and Memory. The chassis health parameters are
applicable for models VRTX version 1.0 and later, M1000e
version 4.4 and later. For versions less than 4.3 only two
health indicators are displayed, namely Healthy and Warning
or Critical (Inverted triangle with an exclamatory mark in
orange color). The overall health indicates the health that is
based on the chassis with the least health parameter. The
options include:
Healthy (green check mark)component operating
normally
Warning (yellow triangle with exclamation point)
component has a noncritical error.
Critical (red X)component has a critical failure.
Unknown (question mark)status is unknown for the
component.
For example, if there are five healthy signs and one warning sign, the overall health is shown as warning.
NOTE: Power monitoring information is not available for hosts with cabled PSU or for modular servers.
View OMIVV host information
You can view the hardware, storage, firmware, power monitoring, warranty, and system event log information about all the
OMIVV-managed hosts on the OMIVV Host Information page.
1. On the OMIVV home page, expand Menu, and then select Hosts and Clusters.
2. In the left pane, select a host, and then click Monitor > OMIVV Host Information.
View hardware information of a host
Table 14. Hardware information for a single host
Hardware:
Component
Information
FRU
Part Namedisplays the FRU part name.
Part Numberdisplays the FRU part number.
Manufacturerdisplays the name of the manufacturer.
Serial Numberdisplays the serial number of the
manufacturer.
Manufacture Datedisplays the manufacture date.
Processors
Socketdisplays the slot number.
Speeddisplays the current speed.
Branddisplays the processor brand.
Versiondisplays the processor version.
Coresdisplays the number of cores in this processor.
Power Supplies
Typedisplays the type of power supply. The power
supply types include:
UNKNOWN
LINEAR
SWITCHING
BATTERY
UPS
Host Management 111