Users Guide

Table 18. Storage details for a single host(continued)
Information Description
○ UNKNOWN
○ FOREIGN
○ UNSUPPORTED
• Configured—displays whether the disk is configured
• Hot Spare Type(Not applicable for PCIe)—shows the hot spare type. The
options include:
○ No—there is no hot spare
○ Global—an unused backup disk that is part of the disk group
○ Dedicated—an unused backup disk that is assigned to a single virtual drive.
When a physical disk in the virtual drive crashes, the hot spare is enabled to
replace the failed physical disk without interrupting the system or requiring your
intervention.
• Virtual Disk—displays the name of the virtual drive
• Bus Protocol—displays the bus protocol
• Controller ID—displays the controller ID
• Media Type—displays either SSD or HDD.
• Remaining Rated Write Endurance—displays the SSD remaining write
endurance.
• Connector ID—displays the connector ID
• Enclosure ID—displays the enclosure ID
• Device ID—displays the device ID
• Model—displays the model number of the physical storage disk
• Part Number—displays the storage part number
• Serial Number—displays the storage serial number
• Vendor—displays the storage vendor name
Controllers
• Controller ID—displays the controller ID
• Name—displays the name of the controller
• Device FQDD—displays the FQDD of the device
• Firmware Version—displays the firmware version
• Minimum Required Firmware—displays the minimum required firmware. This
column is populated if the firmware is out of date and a newer version is available
• Driver Version—displays the driver version
• Patrol Read State—displays the Patrol Read State
• Cache Size—displays the cache size
Enclosures
• Controller ID—displays the controller ID
• Connector ID—displays the connector ID
• Enclosure ID—displays the enclosure ID
• Name—displays the name of the enclosure
• Device FQDD—displays the device FQDD
• Service Tag—displays the service tag
About system event logs in web client
System event log (SEL) provides status information for hardware that is discovered by OMIVV and displays information based on the
following criteria:
Status
There are several status icons: Informational (blue exclamation point), Warning (yellow triangle with exclamation
point), Error (red X), and Unknown (a box with a ?).
Time (Server
Time)
Indicates the time and date when the event occurred.
Search this page Displays the specific message, server names, configuration settings, and so on.
66 Inventory and warranty management