Users Guide

Table 13. Host summary information
Information Description
Alternating system Displays alerts for OpenManage Integration for VMware vCenter
in a yellow box under the status area and preceding the portlets.
Notification area Displays the Dell products integration information in the right
side-panel area, where you can find information about:
• Recent Tasks
• Work In Progress
• Alarms
The Dell alarm information is displayed in the notification area
portlet.
5. Scroll down to view the OMIVV Server Management portlet.
Table 14. OMIVV server Management portlet
Information Description
Service Tag Displays the service tag for your PowerEdge server. Use this ID
when you call for support.
Model Name Displays the server’s model name.
Fault Resilient Memory Displays the status of a BIOS attribute. The BIOS attribute is
enabled in the BIOS during initial setup of the server and displays
the memory operational mode of the server. Restart your system
when you change the memory operational mode value. This is
applicable for 12th Gen of the PowerEdge servers and later that
support Fault Resilient Memory (FRM) option, running ESXi 5.5
or later version. The four different values of BIOS attribute are:
• Enabled and Protected: This value indicates that the system
is supported and the operating system version is ESXi 5.5 or
later and the memory operational mode in BIOS is set to
FRM.
• NUMA Enabled and Protected: This value indicates that the
system is supported and the operating system version is ESXi
5.5 or later and the memory operational mode in BIOS is set
to NUMA.
• Enabled and Not Protected: This value indicates that it
supports the system with operating system version lesser
than ESXi 5.5.
• Disabled: This value indicates that it supports valid systems
with any operating system version and the memory
operational mode in BIOS is not set to FRM.
• Blank: If memory operational mode in BIOS is not supported,
the FRM attribute is not displayed.
System Lockdown Mode Displays the status of the iDRAC Lockdown Mode for 14th Gen
PowerEdge servers. A closed lock represents the iDRAC
Lockdown Mode is turned on whereas an opened lock represents
the iDRAC Lockdown Mode is turned off.
Identification Displays the following:
• Hostname—Displays name of the OMIVV-managed host
• Power State—Displays if power is ON or OFF
• iDRAC IP—Displays the iDRAC IP address
• Management IP—Displays the management IP address
• Connection Profile—Displays the connection profile name for
this host
Inventory and warranty management 61