Users Guide

8. In the Select Hosts dialog box, select hosts for this connection profile.

9. Click OK.

The Associated Host dialog box lets you test the iDRAC and host credentials on the selected servers.

10. Perform one of the following steps:

• To begin the test, select the hosts and then click

. The other options are inactive.

NOTE: : Do not add an MX server having iDRAC IPv4 disabled to a connection profile. These servers can be

managed using a chassis profile.

NOTE: If the WBEM service is disabled for all hosts running ESXi 6.5 or later, WBEM is automatically enabled

when you perform the test connection and inventory on those hosts.

When the test is complete, click Finish.

• To stop the tests, click Abort All Tests. In the Abort Tests dialog box, click OK, and then click Finish.

NOTE: The Date Modified and Last Modified By fields include changes that you perform through the web client interface

for a connection profile. Any changes that the OMIVV appliance performs on the respective connection profile do not

affect these two field details.

Deleting connection profile

NOTE: Ensure that you do not delete a connection profile that is associated with a host when an inventory, a warranty,

or a deployment job is running.

1. In OpenManage Integration for VMware vCenter, click Manage.

2. Click Profiles, and then click Credential Profiles.

3. Expand Credential Profiles, click the Connection Profiles tab, and select the profiles to delete.

4. Click

5. To remove the profile, click Yes for the delete confirmation message, or to cancel the delete action, click No.

NOTE:

OMIVV does not manage the hosts that are part of the connection profile that you deleted, until those hosts are

added to another connection profile.

Testing connection profile

1. In OpenManage Integration for VMware vCenter, click Manage.

2. Click Profiles, and then click Credential Profiles.

3. Expand Credential Profiles, click the Connection Profiles tab, and select a connection profile.

4. In the Test Connection Profile dialog box, select the hosts you want to test, and then click the icon.

If you do not select a connection profile, running test connection takes some time.

5. To stop all selected tests and cancel the testing, click Abort All Tests. In the Abort Tests dialog box, click OK.

6. To exit, click Cancel.

About chassis profile

OMIVV can monitor all Dell EMC Chassis associated with the Dell EMC servers. A chassis profile is required to monitor the chassis. You

can manage chassis profile by performing the following tasks:

• View chassis profile. See Viewing chassis profile.

• Create chassis profile. See Creating chassis profile.

• Edit chassis profile. See Editing chassis profile.

• Delete chassis profile. See Deleting chassis profile.

• Test chassis profile. See Testing chassis profile.

Profiles