Users Guide

Processor version is displayed as “Not Applicable” in
processor view in system overview page
In PowerEdge 12
th
Generation Dell servers and higher generations, the processor version is in the Brand column. In lower generation
servers, processor version is shown in the Version column.
Does OMIVV support vCenter in linked mode
Yes, OMIVV supports up to 10 vCenter servers either in a linked mode or not in a linked mode. For more information about how OMIVV
works in linked mode, see the white paper, OpenManage Integration for VMware vCenter: Working in Linked Mode at www.dell.com.
What are required port settings for OMIVV
NOTE: When deploying the OMSA agent by using the Fix non-compliant vSphere hosts link available from the
Compliance window in OMIVV, OMIVV starts the http client service and enables port 8080 on releases after ESXI 5.5 to
download the OMSA VIB and install it. After the OMSA VIB installation is complete, the service automatically stops and
the port is closed.
Use the following port settings for OMIVV:
Table 42. Virtual appliance
Port
Number
Protocols Port
Type
Maximum
Encryption
Level
Direction Destination Usage Description
53 DNS TCP None Out OMIVV
appliance to
DNS server
DNS client Connectivity to the DNS server or
resolving the host names.
69 TFTP UDP None Out OMIVV
appliance to
TFTP server
TFTP Client Used for firmware update on 11G
servers with old firmware.
80 HTTP TCP None Out OMIVV
appliance to
internet
Dell Online Data
Access
Connectivity to the online (internet)
warranty, firmware and latest RPM
information.
80 HTTP TCP None In ESXi server to
OMIVV
appliance
HTTP server Used in OS deployment flow for post
installation scripts to communicate
with the OMIVV appliance.
162 SNMP
Agent
UDP None In iDRAC/ESXi to
OMIVV
appliance
SNMP Agent
(server)
To receive SNMP traps from managed
nodes.
443 HTTPS TCP 128-bit In OMIVV UI to
OMIVV
appliance
HTTPS server Web services offered by OMIVV.
These Web services are consumed by
vCenter Web Client and Dell Admin
portal.
443 WSMAN TCP 128-bit In/Out OMIVV
appliance to/
from iDRAC/
OMSA
iDRAC/OMSA
communication
iDRAC, OMSA, and CMC
communication, used to manage and
monitor the managed nodes.
445 SMB TCP 128-bit Out OMIVV
appliance to
CIFS
CIFS
communication
To communicate with windows share.
4433 HTTPS TCP 128-bit In iDRAC to
OMIVV
appliance
Auto Discovery Provisioning server used for auto
discovering managed nodes.
Frequently Asked Questions-FAQ 145