Users Guide

Table 28. Hardware inventory information(continued)
Hardware
inventory:
Component
Navigation through OMIVV Information
• In the Monitor tab, expand the
left pane, click Hardware
Inventory, and then click Fabric.
• Compute Count
• Uplink Count
To view the switches that are associated with the fabric, select a fabric
component and the following information is displayed in the lower grid:
• Switch
• Chassis
• Slot
• Chassis Role
• Switch Model
PCIe Use either of the following methods:
• In the Overview tab, click PCIe.
• In the Monitor tab, expand the
left pane, click Hardware
Inventory, and then click PCIe.
Information about PCIe:
• PCIe slot
○ Slot
○ Name
○ Power status
○ Fabric
• Server slot
○ Name
○ Number
To view additional information, select the corresponding PCIe and
following information is displayed:
• Slot type
• Server mapping
• Assignment status
• Allocated slot power
• PCI ID
• Vendor ID
NOTE: PCIe information is not applicable for M1000e chassis.
iKVM Use either of the following methods:
• In the Overview tab, click iKVM.
• In the Monitor tab, expand the
left pane, click Hardware
Inventory, and then click iKVM.
Information about iKVM:
• iKVM Name
• Present
• Firmware version
• Front Panel USB/Video enabled
• Allow access to CMC CLI
NOTE: You can view information about the iKVM only for
PowerEdge M1000e Chassis
NOTE: The iKVM tab is displayed only if the chassis contains
iKVM module.
Viewing additional hardware configuration for
chassis
You can view information about the warranty, storage, firmware, management controller details within the selected chassis. To view the
information in this page, ensure that you run an inventory job and export a .CSV file with the component information.
To view warranty, storage, firmware, management controller details for chassis, perform the following steps:
102
Chassis management