Users Guide

Table 28. Hardware inventory information(continued)
Hardware
inventory:
Component
Navigation through OMIVV Information
NOTE: In an MX chassis, the presence of a fan is indicated as
'Yes' even when a fan is removed from the chassis. However,
the fan health is displayed as Critical on the Summary page
with active error.
Power supplies Use either of the following methods:
• In the Overview tab, click
Power Supplies.
• In the Monitor tab, expand the
left pane, click Hardware
Inventory, and then click Power
Supplies.
Information about power supplies:
• Name
• Capacity
• Present
• Power state
• Input Voltage (Only for MX chassis)
Temperature
sensors
Use either of the following methods:
• In the Overview tab, click
Temperature Sensors.
• In the Monitor tab, expand the
left pane, click Hardware
Inventory, and then click
Temperature Sensors.
Information about temperature sensors:
• Location
• Reading
• Warning threshold
○ Maximum
○ Minimum
• Critical threshold
○ Maximum
○ Minimum
NOTE: For PowerEdge M1000e chassis, information about
the temperature sensors is displayed only for chassis. For
other chassis, information about the temperature sensors is
displayed for chassis and associated modular servers.
I/O modules Use either of the following methods:
• In Overview tab, click I/O
Modules.
• In Monitor tab, expand the left
pane, click Hardware Inventory,
and then click I/O Modules.
Information about I/O modules:
• Slot/Location
• Present
• Name
• Fabric
• Service Tag
• Power Status
To view additional information, select the corresponding I/O module and
the following information is displayed:
• Role
• Firmware version
• Hardware version
• IP address
• Subnet mask
• Gateway
• MAC address
• DHCP enabled
Fabric (Only for
MX chassis)
Use either of the following methods:
• In the Overview tab, click
Fabric.
Information about Fabric components:
• Health
• Fabric
• Description
• Switch Count
Chassis management 101