Install Guide
• For the rst time after the chassis is selected
• When you change the credentials
• If the chassis is newly selected
NOTE: For an MX chassis congured with an MCM group, Dell EMC recommends managing all the lead and member
chassis using the lead chassis. The member chassis test connection operation will fail and test result status that is indicated
as Fail. Click the lead chassis IP link to discover the complete MCM group.
The test result is displayed in the Test Result column as Pass or Fail. To test the chassis connectivity manually, select the chassis and
click .
NOTE: If there are no hosts present in the registered vCenters which are associated to the added MX chassis, the
respective chassis test connection fails.
NOTE: Only successfully validated chassis is associated with a chassis prole.
10 To complete the prole, click Finish.
NOTE: Ensure that you have at least one successfully validated chassis to complete the wizard.
To add an MX chassis management module IP, see Adding MX Chassis IP or FQDN topic in User's Guide.
42 Appliance conguration for VMware vCenter