Install Guide

NOTE: The Dell EMC hosts that have alarms enabled respond to some specic critical events by entering in to maintenance

mode and you can modify the alarm, when required.

The Enabling Dell EMC Alarm Warning dialog box is displayed.

3 To accept the change, click Continue, or to cancel the change, click Cancel.

NOTE: Ensure that you complete this step only if you select Enable Alarms for all Dell EMC Hosts.

4 To restore the default vCenter alarm settings for all managed Dell EMC servers, click Restore Default Alarms.

It might take up to a minute before the change takes eect.

NOTE: After restoring the appliance, the events and alarms settings are not enabled even if the GUI shows as enabled. You

can enable the Events and Alarms settings again from the Settings tab.

NOTE: BMC Traps do not have Message IDs, so alerts will not have these details in OMIVV.

5 Click Apply.

Conguring SNMP trap community string

1 On the OpenManage Integration for VMware vCenter page, on the Manage > Settings tab, under Appliance Settings, click

against the OMSA SNMP Trap Community String.

The OMSA SNMP Trap Community String Settings dialog box is displayed. By default, public is displayed in the SNMP trap

community string.

2 Customize the public text to any string, and click Apply.

NOTE

: The SNMP trap community string conguration for 11

generation of PowerEdge servers is set while installing or

upgrading OMSA through OMIVV.

Conguration tasks through settings tab

By using the settings tab, you can view and perform the following conguration tasks:

• Enable the OMSA link. See Enabling OMSA link.

• Congure warranty expiration notication settings. See the Conguring warranty expiration notication settings.

• Set up the rmware update repository. See Setting up the rmware update repository.

• Congure the latest appliance version notication. See Conguring the latest appliance version notication.

• Congure and view events and alarms. See the Conguring events and alarms.

• View data retrieval schedules for inventory and warranty. See the Viewing data retrieval schedules for inventory and warranty.

Appliance settings

In this section, congure the following for the OMIVV appliance:

• Warranty expiration notication

• Firmware update repository

• Latest appliance version notication

• Deployment credentials

Appliance conguration for VMware vCenter