Users Guide

Information Description
Read-Ahead
No-Read-Ahead
Adaptive Read-Ahead
Read Cache Enabled
Read Cache Disabled
Default Write Policy—displays the default write policy supported by the
controller. The options include:
Write-Back
Force Write Back
Write Back Enabled
Write-Through
Write Cache Enabled Protected
Write Cache Disabled
Cache Policy—displays if cache policy is enabled
Physical Disks — When you select this option,
the Filter drop-down list is displayed.
You can filter physical disks based on the
following options:
All Physical Disks
Global Hot Spares
Dedicated Hot Spares
The last option displays custom named
virtual disks
Name—displays the name of the physical disk
Device FQDD—displays the device FQDD
Capacity—displays the physical disk capacity
Disk Status—displays physical disk status. The options include:
ONLINE
READY
DEGRADED
FAILED
OFFLINE
REBUILDING
INCOMPATIBLE
REMOVED
CLEARED
SMART ALERT DETECTED
UNKNOWN
FOREIGN
UNSUPPORTED
Configured—displays whether the disk is configured
Hot Spare Type—shows the hot spare type. The options include:
No—there is no hot spare
Global—an unused backup disk that is part of the disk group
Dedicated—an unused backup disk that is assigned to a single virtual disk.
When a physical disk in the virtual disk fails, the hot spare is enabled to replace
the failed physical disk without interrupting the system or requiring your
intervention.
Virtual Disk—displays the name of the virtual disk
Bus Protocol—displays the bus protocol
Controller ID—displays the controller ID
Connector ID—displays the connector ID
Enclosure ID—displays the enclosure ID
Device ID—displays the device ID
Model—displays the model number of the physical storage disk
Part Number—displays the storage part number
Serial Number—displays the storage serial number
Vendor—displays the storage vendor name
Controllers
Controller ID—displays the controller ID
Name—displays the name of the controller
Device FQDD—displays the FQDD of the device
60 Inventory and warranty management