OpenManage Integration for VMware vCenter Version 4.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2011 - 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Overview........................................................................................................................................................ 4 Default virtual appliance configuration ........................................................................................................................... 4 Other documents you may need......................................................................................................................................
1 Overview This document contains updated information about OpenManage Integration for VMware vCenter(OMIVV) and any other Technical Documentation included with the OMIVV software. The OpenManage Integration for VMware vCenter 4.2 provides the following features: • Existing Cluster Aware Update is enhanced to support vSAN clusters. It supports driver and firmware updates.
2 Supported resources This chapter contains sections that provides information about the resources that support OpenManage Integration for VMware vCenter.
Table 3. BIOS for PowerEdge 11th generation servers Server Minimum version PowerEdge R210 1.8.2 or later PowerEdge R210II 1.3.1 or later PowerEdge R310 1.8.2 or later PowerEdge R410 1.9.0 or later PowerEdge R415 1.8.6 or later PowerEdge R510 1.9.0 or later PowerEdge R515 1.8.6 or later PowerEdge R610 6.1.0 or later PowerEdge R710 6.1.0 or later PowerEdge R710 6.1.0 or later PowerEdge R715 3.0.0 or later PowerEdge R810 2.5.0 or later PowerEdge R815 3.0.
Server Minimum version R220 1.0.3 or later R320 1.2.4 or later R420 1.2.4 or later R520 1.2.4 or later R620 1.2.6 or later R720 1.2.6 or later R720xd 1.2.6 or later R820 1.7.2 or later R920 1.1.0 or later Table 5. BIOS for PowerEdge 13th generation servers Server Minimum version R630 1.0.4 or later R730 1.0.4 or later R730xd 1.0.4 or later R430 1.0.4 or later R530 1.0.2 or later R830 1.0.2 or later R930 1.0.2 or later R230 1.0.2 or later R330 1.0.2 or later T630 1.0.
Server Minimum Version R640 1.0.0 or later M640 1.0.0 or later T640 1.0.0 or later T440 1.0.0 or later R540 1.0.0 or later FC640 1.0.0 or later R6415 1.0.0 or later R7425 1.0.0 or later R7415 1.0.0 or later Table 7. iDRAC and Lifecycle Controller for deployment Generation Version iDRAC Lifecycle Controller PowerEdge 11th generation servers 3.35 for Modular, 1.85 for Rack or Tower 1.5.2 or later PowerEdge 12th generation servers 1.00.0 or later 1.0.0.
Table 9. Virtual appliance Port Number Protocols Port Type Maximum Encryption Level Direction Destination Usage Description 53 DNS TCP None Out OMIVV appliance to DNS server DNS client Connectivity to the DNS server or resolving the host names. 69 TFTP UDP None Out OMIVV appliance to TFTP server TFTP Client Used for firmware update on 11G servers with old firmware.
Port Number Protocols Port Type Maximum Encryption Level Direction Destination Usage Description User defined Any UDP/T CP None Out OMIVV appliance to proxy server Proxy To communicate with the proxy server Table 10.
Port Number Protocols Port Type Maximum Encryption Level Direction Destination Usage Description To access the iDRAC configurations from the OMIVV. Used in deployment flow. 69 TFTP UDP 128-bit In/Out iDRAC to/from OMIVV Trivial File Transfer Used for managing the iDRAC successfully from the management station.
The OpenManage Integration for VMware vCenter supports any of the following vCenter server versions: Table 13. Supported vCenter server versions vCenter version Web client support v6.0 U2 Y v6.0 U3 Y v6.5 Y v6.5 U1 Y v6.7 Y NOTE: For more information about registering a vCenter server, see OpenManage Integration for VMware vCenter Version 4.2 Web Client Install Guide available at Dell.com/support/manuals. The OpenManage Integration for VMware vCenter version 4.
Resource Platform 11th 12th and 13th 14th Warranty Information Y Y Y Host Compliance Y Y Y Auto/Manual discovery of bare-metal server Y Y Y Bare-Metal compliance Y Y Y Hardware Configuration Y Y Y Bare-Metal Hypervisor Deployment Y Y Y Blink Server LED Y Y Y View/Clear SEL logs Y Y Y Link and Launch iDRAC Y Y Y iDRAC reset Y Y Y System Lockdown Mode N N Y System Profile N N Y Cluster Profile N Y^ Y * In Cloud with model number C6320, health monitoring
3 Important notes This section provides important information that you must consider when you are working on OpenManage Integration for VMware vCenter. • OMIVV supports BIOS mode to deploy hypervisor on the target server. Ensure that you have BIOS mode selected in the reference hardware profile before applying the hypervisor profile. If there is no hardware profile selected, ensure that you manually configure the Boot mode as BIOS and reboot the server before applying the hypervisor profile.
