Users Guide

Table 14. Dell EMC server Management portlet
Information Description
Service Tag Displays the service tag for your PowerEdge server. Use this ID
when you call for support.
Model Name Displays the server’s model name.
Fault Resilient Memory Displays the status of a BIOS attribute. The BIOS attribute is
enabled in the BIOS during initial setup of the server and displays
the memory operational mode of the server. Restart your system
when you change the memory operational mode value. This is
applicable for 12th generation of the PowerEdge servers and
later that support Fault Resilient Memory (FRM) option, running
ESXi 5.5 or later version. The four different values of BIOS
attribute are:
• Enabled and Protected: This value indicates that the system
is supported and the operating system version is ESXi 5.5 or
later and the memory operational mode in BIOS is set to
FRM.
• NUMA Enabled and Protected: This value indicates that the
system is supported and the operating system version is ESXi
5.5 or later and the memory operational mode in BIOS is set
to NUMA.
• Enabled and Not Protected: This value indicates that it
supports the system with operating system version lesser
than ESXi 5.5.
• Disabled: This value indicates that it supports valid systems
with any operating system version and the memory
operational mode in BIOS is not set to FRM.
• Blank: If memory operational mode in BIOS is not supported,
the FRM attribute is not displayed.
System Lockdown Mode
Displays the status of the iDRAC Lockdown Mode for 14th
generation PowerEdge servers. A closed lock represents the
iDRAC Lockdown Mode is turned on whereas an opened lock
represents the iDRAC Lockdown Mode is turned off.
Identification
Displays the following:
• Host name—Displays name of the Dell EMC host
• Power State—Displays if power is ON or OFF
• iDRAC IP—Displays the iDRAC IP address
• Management IP—Displays the management IP address
• Connection Profile—Displays the connection profile name for
this host
• Model—Displays the Dell EMC server model
• Service Tag—Displays the Service tag for the server
• Asset Tag—Displays the Asset tag
• Warranty Days Left—Displays the days left for the warranty
• Last Inventory Scan—Displays the date and time of the last
inventory scan
Hypervisor & Firmware
Displays the following:
• Hypervisor—Displays the Hypervisor version
• BIOS Version—Displays the BIOS version
• Remote Access Card Version—Displays the remote access
card version
Management Consoles The management consoles are used to launch external system
management consoles, such as:
52 Inventory and warranty management