Users Guide

Does OMIVV support vCenter in linked mode?
Yes, OMIVV supports up to 10 vCenter servers either in a linked mode or not in a linked mode. For more information about how OMIVV
works in linked mode, see the white paper, OpenManage Integration for VMware vCenter: Working in Linked Mode at www.dell.com.
What are required port settings for OMIVV?
NOTE: When deploying the OMSA agent by using the Fix non-compliant vSphere hosts link available from the
Compliance window in OMIVV, OMIVV starts the http client service and enables port 8080 on releases after ESXI 5.0 to
download the OMSA VIB and install it. After the OMSA VIB installation is complete, the service automatically stops and
the port is closed.
Use the following port settings for OMIVV:
Table 43. Virtual appliance ports
Port number Protocols Port type Max. Encryption
Level
Direction Usage Configurable
21 FTP TCP None Out FTP command
client
No
53 DNS TCP None Out DNS client No
80 HTTP TCP None Out Dell Online Data
Access
No
80 HTTP TCP None In Administration
Console
No
162 SNMP Agent UDP None In SNMP Agent
(server)
No
11620 SNMP Agent UDP None In SNMP Agent
(server)
No
443 HTTPS TCP 128–bit In HTTPS server No
443 WSMAN TCP 128–bit In/Out iDRAC/OMSA
communication
No
4433 HTTPS TCP 128–bit In Auto Discovery No
2049 NFS UDP None In/Out Public Share No
4001–4004 NFS UDP None In/Out Public Share No
11620 SNMP Agent UDP None In SNMP Agent
(server)
No
Table 44. Managed nodes
Port number Protocols Port type Max.
Encryption
Level
Direction Usage Configurable
162, 11620 SNMP UDP None Out Hardware events No
443 WSMAN TCP 128–bit In iDRAC/OMSA
communication
No
2049 NFS UDP None In/Out Public Share No
4001–4004 NFS UDP None In/Out Public Share No
443 HTTPS TCP 128–bit In HTTPS server No
4433 HTTPS TCP 128–bit Out Auto Discovery No
8080 HTTP TCP In HTTP server;
downloads the
OMSA VIB and
No
Troubleshooting 123