Users Guide

Table 26. Virtualization events (continued)
Event name Description Severity Recommended action
Dell-Fan enclosure sensor
detected a non-recoverable
value
A fan enclosure sensor in the
specified system detected an
error from which it cannot
recover
Error No action
Dell-AC power has been
restored
Sensor Returned to Normal
Value
Info No action
Dell-AC power has been lost
warning
An AC power cord has lost its
power, but there is sufficient
redundancy to classify this as a
warning
Warning No action
Dell-An AC power cord has lost
its power
An AC power cord has lost its
power, and lack of redundancy
requires this to be classified as
an error
Error No action
Dell-Processor sensor returned
to a normal value
Sensor Returned to Normal
Value
Info No action
Dell-Processor sensor detected
a warning value
A processor sensor in the
specified system is in a throttled
state
Warning No action
Dell-Processor sensor detected
a failure value
A processor sensor in the
specified system is disabled, has
a configuration error, or
experienced a thermal trip
Error No action
Dell-Processor sensor detected
a non-recoverable value
A processor sensor in the
specified system has failed.
Error No action
Dell-Device configuration error A configuration error was
detected for a pluggable device
in the specified system
Error No action
Dell-Battery sensor returned to
a normal value
Sensor Returned to Normal
Value
Info No action
Dell-Battery sensor detected a
warning value
A battery sensor in the specified
system detected that a battery
is in a predictive failure state
Warning No action
Dell-Battery sensor detected a
failure value
A battery sensor in the specified
system detected that a battery
has failed
Error No action
Dell-Battery sensor detected a
nonrecoverable value
A battery sensor in the specified
system detected that a battery
has failed
Error No Action
Dell-Thermal shutdown
protection has been initiated
This message is generated
when a system is configured for
thermal shutdown due to an
error event. If a temperature
sensor reading exceeds the
error threshold for which the
system is configured, the
operating system shuts down
and the system powers off. This
event may also be initiated on
certain systems when a fan
enclosure is removed from the
system for an extended period
of time
Error No action
Events, alarms, and health monitoring 73