Users Guide

8. In the Select Hosts dialog box, select hosts for this connection profile.
9. Click OK.
The Associated Host dialog box lets you test the iDRAC and host credentials on the selected servers.
NOTE: If you select hosts that are running ESXi 6.5 or later, ensure that you click the icon for enabling the WBEM
service on all those hosts.
10. Perform one of the following steps:
• To create a connection profile without testing the credentials, click Finish.
• To begin the test, select the hosts to check and then click the Test Connection icon. The other options are inactive.
NOTE: The test connection fails if the WBEM service is not enabled for hosts with ESXi 6.5 or later.
When the test is complete, click Finish.
• To stop the tests, click Abort All Tests. In the Abort Tests dialog box, click OK, and then click Finish.
NOTE: The Date Modified and Last Modified By fields include changes that you perform through the web client interface
for a connection profile. Any changes that the OMIVV appliance performs on the respective connection profile do not
affect these two field details.
Deleting connection profile
NOTE: Ensure that you do not delete a connection profile that is associated with a host when an inventory, a warranty,
or a deployment job is running.
1. In OpenManage Integration for VMware vCenter, click Manage.
2. Click Profiles, and then click Credential Profiles.
3. Expand Credential Profiles, click the Connection Profiles tab, and select the profiles to delete.
4. Click the icon.
5. To remove the profile, click Yes for the delete confirmation message, or to cancel the delete action, click No.
NOTE:
OMIVV does not manage the hosts that are part of the connection profile that you deleted, until those hosts are
added to another connection profile.
Testing connection profile
1. In OpenManage Integration for VMware vCenter, click Manage.
2. Click Profiles, and then click Credential Profiles.
3. Expand Credential Profiles, click the Connection Profiles tab, and select a connection profile.
4. In the Test Connection Profile dialog box, select the hosts you want to test, and then click the Test Connection icon.
If you do not select a connection profile, running test connection takes some time.
5. To abort all selected tests and cancel the testing, click Abort All Tests. In the Abort Tests dialog box, click OK.
6. To exit, click Cancel.
About chassis profile
OMIVV can monitor all Dell Chassis associated with the Dell servers. A chassis profile is required to monitor the chassis. You can manage
chassis profile by performing the following tasks:
• View chassis profile. See Viewing chassis profile.
• Create chassis profile. See Creating chassis profile.
• Edit chassis profile. See Editing chassis profile.
• Delete chassis profile. See Deleting chassis profile.
• Test chassis profile. See Testing chassis profile.
Profiles
43