Users Guide

Figure 2. VLAN network.
In this example network, the OMIVV appliance is on VLAN 5, while the vCenter and the VMkernal of the ESXi hosts being deployed are on
VLAN 10. Since OMIVV does not support multi-VLAN homing, VLAN 5 must route to VLAN 10 for all systems to communicate to each
other correctly. If routing is not enabled between these VLANs, the deployment fails.
Running Deployment Wizard
Ensure that you create a deployment template with hardware profile and hypervisor profile, and connection profile for the vCenter before
running the deployment wizard.
To run the deployment wizard:
1. In the OpenManage Integration for VMware vCenter, select the Manage > Deployment tab.
2. In the Bare Metal Servers window, click the Run Deployment Wizard link.
The Deployment Wizard Welcome page is displayed.
3. In the Welcome page, view the information and click Next.
4. In the Select the servers for deployment page, to assign compliant bare-metal servers to a deployment job, click the check boxes
next to the list of servers.
5. Click Next.
6. In the Select Template/Profile page, perform the following substeps:
a. Under Deployment Template, to assign a deployment template to the selected servers, select an existing deployment template
from Select Deployment Template.
You can select one of the following deployment templates from the drop-down list:
• If you select a hardware profile only deployment template that only configures server hardware, go to step 10.
• If you select hypervisor profile deployment template that deploys a hypervisor, continue from step 6 (b) onwards.
NOTE:
If you select hardware profile only deployment, you are automatically prompted to include information
for the Schedule Deployment page.
b. Under Hypervisor Installation, select either of the following options:
• Hard Disk—deploys a hypervisor on the hard drive.
• Internal Dual SD Module—deploys a hypervisor on the IDSDM.
NOTE:
If an IDSDM is available on at least one of the selected servers, the Internal Dual SD Module option is
enabled. If not, only the Hard Disk option is available.
100 Deploying hypervisor