Users Guide
• Scheduling the server deployment jobs to run.
• Displaying the Job Queue where you can manage deployment jobs.
NOTE: If you’re deploying a hardware prole only, then the new Global Settings, Server Identication, and Connection
Prole pages are skipped and you go directly to the Schedule Job page.
NOTE: For trial/evaluation license, you can use Deployment wizard as long as license is not expired.
Related Tasks:
• Deployment Wizard Step 1: Select Servers
• Deployment Wizard Step 2: Deployment Templates
• Deployment Wizard Step 3: Global Settings
• Deployment Wizard Step 4: Server Identication
• Deployment Wizard Step 5: Connection Prole
• Deployment Wizard Step 6: Schedule Jobs
Deployment Wizard - Step 1: Select Servers
This page covers server deployment. If you want to deploy hypervisor to an Internal Dual SD Module, this page displays whether that
option is available or unavailable. For more information about Internal Dual SD Modules see, Running The Deployment Wizard. If the
server you want to deploy does not display in the list for step 2, you can manually add a server to have it display in the list for this
step, see Adding A Server Manually.
To select servers:
1. In the Dell Management Center, select Deployment → Deployment Wizard.
2. In the Select Servers window, to assign non-deployed servers to this deployment job, use the check boxes to select Servers.
3. Click Next.
To continue with the task to step two, click Deployment Wizard Step 2.
Deployment Wizard Step 2: Deployment Templates
Deployments to a hardware prole dier from hypervisor deployments. If you are deploying to a hardware prole, click Deployment
Wizard Step 6.
To select a deployment template:
1. Deployment Template selects/creates a deployment template in one of several ways:
• Select an existing deployment template under Available Templates. Information for the selected template populates the
right pane.
• Select an existing deployment template, and then click Edit to change one or both associated proles.
• Click Create New to dene a new template.
2. Select one of the following:
• If you are deploying to a hardware prole, click Next, which jumps you to Deployment Wizard Step 6.
• If you are deploying to a hypervisor prole, click Next, which takes you to Deployment Wizard Step 3.
Deployment Wizard Step 3: Global Settings
You can deploy hypervisor to either a hard drive or an Internal Dual SD Module. If an Internal Dual SD Module is available on at least
one of the servers selected, the Internal Dual SD Module option is enabled by default. If not, both the Hard Disk and Internal Dual
SD Module options are not selected.
To deploy the hypervisor, perform the following steps:
1. In the Global Settings page, select one of the following options:
58