Users Guide
4. To complete the template, click Edit.
5. In the right pane, in the Prole drop-down list, choose a prole, and then do one of the following:
• To display the hardware/hypervisor prole settings for the selected prole, click View.
• To create a new hardware/hypervisor prole, click Create New.
6. Enter an optional Description for the deployment template that is helpful for managing the template.
7. To apply prole selections and save changes, click Save. To cancel, click Cancel.
Managing Deployment Templates
From the Dell Management Center, there are several management actions you can perform on existing deployment templates,
including:
• Building Deployment Templates
• Duplicating Deployment Templates
• Renaming Deployment Templates
• Deleting Deployment Templates
Duplicating Deployment Templates
To duplicate a deployment template:
1. In the Dell Management Center, select Deployment → Deployment Templates.
2. On the Deployment Templates page, select a template, and then click Duplicate.
3. Enter the template's new name and click Apply. The template must have a unique name.
Deleting Deployment Templates
To delete a deployment template:
1. In the Dell Management Center, select Deployment → Deployment Templates.
2. On the Deployment Templates page, select a template and click Delete.
3. Click Delete on the message box to delete the template, or click Cancel to cancel.
Renaming Deployment Templates
To rename deployment template:
1. In the Dell Management Center, select Deployment → Deployment Templates.
2. On the Deployment Templates page, select a template, click Rename.
3. Enter the template's new name and click Apply. The template must have a unique name.
4. To display all deployment templates, from the Dell Management Center select Deployment → Deployment Templates and
click Refresh.
Running The Deployment Wizard
The Deployment Wizard steps you through the bare metal server deployment process of:
• Selecting undeployed servers.
When you deploy hypervisor, you can deploy to an Internal Dual SD Module with a minimum of 1 GB of storage. The Internal Dual
SD Module must be enabled from the BIOS before you deploy the hypervisor with the OpenManage Integration for VMware
vCenter.
• Using a deployment template (hardware and hypervisor proles combination).
• Setting up global settings. This page lets you choose to deploy hypervisor to a hard disk or Internal Dual SD Module.
• Assigning identication to the deployed servers.
• Matching a desired connection prole to each server.
57