Users Guide
Server Information
Server information provides identication, hypervisor, and rmware information, such as:
• Host name, power state, iDRAC IP, Management IP, connection prole in use, model, service tag and asset tag numbers, number
of days left on the warranty, and when the last inventory scan was performed.
• Hypervisor, BIOS rmware, and iDRAC rmware versions.
• Ten most recent system event log entries. Click Details to launch the System Event Log window that displays additional log
details.
Host Information
In the left pane of the Host Overview, you can nd the links to the following types of Host information:
• System Event Log
Displays hardware system event log information. See Understanding System Event Logs.
• Hardware Inventory
Displays information about the following hardware devices:
– Field Replaceable Units (FRUs) such as DIMMs, system planar, power supplies, backplanes, controller cards, and others.
– Memory — Number of slots available and in use, maximum capacity and amount of memory in use, and details on individual
DIMMs.
– Network Interface Cards (NICs) — Number of installed cards and details on individual NICs.
– PCI Slots — Total available and number in use and details on individual slots.
– Power Supplies — Number present and details on individual PSUs.
– Processors — Number present and details on individual CPUs.
– Remote Access Card — IP address information and RAC type and Web interface URL.
See About Inventory Jobs.
• Storage
The host system storage provides a graphical and detailed view of the capacity and type of physical and logical storage for
storage connected to a host-based storage controller, including:
– Host system total storage, uncongured, congured, and both global and dedicated hot spare disks capacity
– List of how many of each storage component is present in the system component data table that contains detailed
information on that component
• Firmware
Run the Firmware Update Wizard or view your rmware version. See Firmware Updates.
• Power Monitoring
The host system power monitoring provides general power information, energy statistics, and reserve power information,
including:
– Current power budget, prole, warning and failure thresholds
– Energy consumption, system peak power, and amperage statistics
– Reserve power and peak reserve capacity
NOTE: Not all power supplies support this feature and blade enclosure power supplies are not supported.
• Warranty
Warranty retrieval provides the following information for Dell servers:
– Updated service warranty information, while only transmitting the host service tag
– Warranty information updated at scheduled intervals
– Secure transmission using a proxy server and credentials
33