Release Notes
Resolution/Workaround: None
Version Aected: 2.0 and later
Issue 19: Hard disk option is not disabled in the Deployment wizard for all the servers that do not contain hard disk drives.
Description: While navigating through the Deployment wizard, if the bare metal servers do not have any hard disk drive, then the
hard disk option should be disabled on the Global Settings tab. However, the option is available for selection.
Resolution/Workaround: None
Version Aected: 2.0 and later
Issue 20: Host Name is not proper (same name is appended) for some host systems.
Description: The host name is either displayed as “Unknown” or the host name is appended with the part of the same host name.
This issue occurs in certain iDRAC versions and is resolved in later iDRAC versions.
Resolution/Workaround: Upgrade to the latest iDRAC rmware. Make sure you restart the system after the upgrade.
Version Aected: 2.0 and later
Issue 21: The Initial Conguration wizard is displayed continuously.
Description: The Initial Conguration wizard may be displayed if you click Cancel after selecting the Do not show again option. To
properly read the Do not show again option, the wizard should move to the next page.
Resolution/Workaround: Select the Do not show again option, and then click Next to move to the next page. Click Cancel to close
the dialog box.
Version Aected: 2.0 and later
Issue 22: The OpenManage Integration icon is not displayed after backup and restore from 2.0 to 3.0.
Description: The OpenManage Integration icon is not displayed after restoring the 2.0 appliance database to a new 3.0 appliance.
Resolution/Workaround: The IP address of the 3.0 appliance must be the same as the 2.0 appliance for the plugin to work correctly
after restore.
Version Aected: 2.0 and later
Issue 23: For an RPM upgrade appliance, Alarms and Events settings are not restoring after backup and restore.
Description: If the alarm settings are changed after taking an appliance back up and restored later, the status of the alarms are not
shown correctly in the settings view.
Resolution/Workaround: Go to Events and Alarms under settings and disable the alarm (if already enabled) and enable it again or do
vice versa.
Version Aected: All
Issue 24: Internal Dual SD Module is disabled for a server that has Internal Dual SD Module and no Hard Disk.
Description: The Dual SD Module check box is disabled for server that has Internal Dual SD Module and no Hard Disk if you open or
create the hardware prole on the deployment template while navigating on the deployment wizard.
Resolution/Workaround: If you see this behavior, perform the step to select the bare metals, reselect the bare metals, and continue
with the wizard.
Versions Aected: 1.5 and later
Issue 25: While applying RAID from reference server, the physical disk order is not maintained as it is in the reference server.
9