Release Notes

• http://kb.vmware.com/selfservice/search.do?

cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalId=2121701

• http://kb.vmware.com/selfservice/search.do?cmd=displayKC&docType=kc&docTypeID=D T_KB_1_1&externalId=2121689

• Dell OpenManage Integration for VMware vCenter 3.1 User's Guide for Web client

Version Aected: 3.1

Issue 7: Firmware Update Wizard shows a message mentioning that the bundles are not retrieved from rmware repository. How can

I continue with the rmware update?

Description: In Web client, when you are running the Firmware Update wizard for a single host, the Select Components screen

displays the rmware details for the components. If you select the desired rmware updates and click Back twice to arrive at the

Welcome page and then click Next, a message is displayed mentioning that the bundles are not retrieved from rmware repository in

the Select Update Source screen.

Resolution/Workaround: You can select the desired rmware updates and click Next to continue with the rmware update.

Version Aected: 3.0 and later

Issue 8: On running a warranty retrieval job, the warranty job status is not listed in the Warranty Job Queue page.

Description: If your network needs proxy details to connect to the internet and the proxy is not set on the OMIVV appliance, the

warranty retrieval job fails and the job is not listed under warranty job queue.

Resolution/Workaround: Set the proxy details and trigger the warranty job again.

Version Aected: All

Issue 9: If vCenter is idle for few hours, the OMIVV content is replaced by a "!" icon on clicking the OpenManage Integration tab and

Management Center. What should I do to resume the session?

Description: If vCenter is idle for few hours, the OMIVV content is replaced by a "!" icon when you click the OpenManage

Integration tab of an inventoried host and Dell Management Center icon to perform any actions.

Resolution/Workaround: You can resume the session by closing the current session and logging in again.

Version Aected: 3.1, vCenter 6.0 and later

Issue 10: Storage overview returning incorrect number of physical disks for inventory.

Description: Systems with software RAID show incorrect number of physical disks on the storage overview page.

Resolution/Workaround: None. The ESXi does not support software RAID. If the system has software RAID it will show incorrect

disks.

Version Aected: All

Issue 11: System Event Logs are not showing in OpenManage Integration for VMware vCenter vSphere client when power supply

redundancy is lost.

Description: When the power redundancy is lost on PowerEdge 12th Generation modular servers, the system logs get cleared.

Resolution/Workaround: None

Version Aected: 3.0 and later

Issue 12: Memory data displays a negative value for a host after successful inventory.

Description: The Total Memory capacity displays as “0” and Memory Installable displays a negative value on the Host Memory

overview page. This issue occurs because of some issue in the iDRAC.