Release Notes
one of the registered vCenter was added to another registered vCenter. In this case the host on rst vCenter appears as
disconnected.
Resolution/Workaround: Remove the host from the rst vCenter where it is now showing as disconnected.
Version Aected: All
Issue 42: The NIC selected as the management NIC during the deployment process is not set as active management NIC after
deployment.
Description: During the ESXi 5 deployment using any NIC other than NIC 0 may show up in vCenter after deployment as the
standby NIC with NIC 0 as the primary management network NIC.
Resolution/Workaround: Manually recongure management NICs in vCenter after deployment.
Version Aected: 1.6 and later
Issue 43: CSIOR status is displayed as “Unknown”.
Description: A server may show as non-compliant with CSIOR status “Unknown”.
Resolution/Workaround: An unknown CSIOR state indicates a non-responsive iDRAC on the host. A manual iDRAC reset on the
host xes this issue.
Version Aected: All
Issue 44: Hypervisor installation fails.
Description: Hypervisor installation fails with the error message: “Mount network share failed – incorrect IP address or share
name.”
Resolution/Workaround: Restart the appliance.
Version Aected: 1.5 and later
Issue 45: NFS mount remains mounted after successful deployment using ESXi 5.0.
Description: After the hypervisor deployment is completed and the host is added to the vCenter tree, there is an entry in the
Summary page under the data sources called “remote-install-location (inactive) (unmounted)” for the new host added.
Resolution/Workaround: None.
Version Aected: 1.5 and later
Issue 46: Health Status is still reported for hosts that are not in a Connection Prole.
Description: The health information is displayed on the Overview page for hosts that are no longer on any Connection Prole.
Resolution/Workaround: None. There is no impact to the functionality of the software.
Version Aected: All
Issue 47: Health Status is showing Warning for chassis while one or more Power supply is critical
Description: The overall health information is displayed warning on summary page for VRTX chassis that has power supply in critical
state.
Resolution/Workaround: Each power supply status is shown correctly as critical.
Version Aected: All
Issue 48: Health Status is showing as Healthy for chassis while Storage status is Warning
14