Release Notes
Version Aected: 1.6 and later
Issue 37: Deployments failure error message displayed on R210 II machines.
Description: Timeout issue on R210 II systems produces a hypervisor deployments failure error due to failure of BIOS to boot from
attached ISO.
Resolution/Workaround: Manually install hypervisor on the machine.
Version Aected: 1.5.1 and later
Issue 38: OpenManage Integration gets a security error message.
Description: Although the SSL Certicate is valid on a vCenter and user credentials are correct, an error message displayed, “There
are either too many Virtual Management Console connections or an incorrect user name or password or session ID, or an incorrect
SSL certicate. Please verify these items and try again.”
Resolution/Workaround: This happens due to an invalid session in vCenter. Close and re-open the vSphere client to resolve this
issue. You can check your session by clicking “Sessions” under Administration in the vSphere Client for advanced troubleshooting.
Version Aected: All
Issue 39: Unable to boot to service partition while deploying OS ISO.
Description: Hypervisor deployments are failing on Dell 11th and 12th generation servers with this error displayed on the screen
during POST: “Warning: Unable to boot to Service Partition.” There is a BIOS issue to identify the network ISO when there is a local
USB CD-ROM installed on the system and that USB CD- ROM is the only USB mass storage device plugged into the system.
Resolution/Workaround: Remove the local USB CD-ROM (note that not all local CD-ROM would expose this issue), or plug in
additional USB oppy or USB key on the system, or attach the virtual media (virtual oppy and virtual CD) from the iDRAC.
Version Aected: 1.5.1 and later
Issue 40: A rmware update fails with an error message saying that USC is in use and it must be retried after 30 seconds.
Description: During a rmware update if the update fails with the error message “If USC is in use, wait until USC has exited and
retry the action. Otherwise retry after 30 seconds to check if network connectivity caused this error.”
Resolution/Workaround: To x this issue, reset iDRAC and wait until iDRAC boots properly and try the rmware update again.
Version Aected: 1.5.1 and later
Issue 41: Events from dierent vCenter are posted to another vCenter from a shared OpenManage Integration Appliance.
Description: This situation can occur when a bare-metal server that was deployed in one vCenter is rediscovered again as bare-
metal server but then selected for a hypervisor deployed in another vCenter. This situation occurs if the host that was already on
13