Users Guide

4. Click the Monitor tab.
5. Click the double arrow mark and expand the left pane, and then click Firmware.
The following information is displayed:
• Component
• Current Version
6. If you click Launch CMC, the Chassis Management Controller page is displayed.
Viewing Management Controller Details for a
Chassis
You can view information about the management controller details for the selected chassis.
To view information about the management controller:
1. On the Home page, click vCenter.
2. In the left pane, under OpenManage Integration, click Dell Chassis.
3. In the left pane, select the corresponding chassis IP.
4. Click the Monitor tab.
5. Click the double arrow mark and expand the left pane, and then click Management Controller.
6. On the Management Controller page, to view additional information, click the arrow mark and expand the left column.
The following information is displayed:
• General
• Name
• Firmware Version
• Last Update Time
• CMC Location
• Hardware Version
• Common Network
• DNS Domain Name
• Use DHCP for DNS
• MAC Address
• Redundancy Mode
• CMC IPv4 Information
• IPv4 Enabled
• DHCP Enabled
• IP Address
• Subnet Mask
• Gateway
• Preferred DNS Server
• Alternate DNS Server
Chassis Management
63