Users Guide

• iDRAC 7 : Select iDRAC settings > Users tab.
• iDRAC 8 : Select iDRAC settings > Users tab.
4. To edit the settings, in the User ID column, click the link for the admin (root) user.
5. Click Configure User, and then click Next.
6. In the User Configuration page for the selected user, select the check box next to Enable user, and then and click Apply.
Does the OpenManage Integration for VMware vCenter
support the VMware vCenter Server appliance?
Yes, the OpenManage Integration for VMware vCenter supports the VMware vCenter Server appliance since v2.1.
Does the OpenManage Integration for VMware vCenter
support the vSphere Web Client?
Yes, the OpenManage Integration for VMware vCenter supports the VMware vSphere Web client.
Why is my firmware level still not updated when I have
performed firmware update with Apply on Next reboot
option and the system was rebooted?
To update firmware, run the inventory on the host after the reboot is completed. In some cases, where the reboot event does not reach
the appliance, the inventory is not automatically triggered. In such situation, you must rerun the inventory manually to get the updated
firmware versions.
Why is the host still shown under the chassis even after
removing the host from the vCenter tree?
The hosts under the chassis are identified as part of the chassis inventory. After a successful chassis inventory, the host list under the
chassis is updated. Therefore, even if the host is removed from the vCenter tree, the host still shows under the chassis till the next
chassis inventory is run.
In the Administration Console, why the Update Repository
Path is not set to default path after I reset the appliance
to factory settings?
After you reset the appliance, go to the Administration Console, and then click APPLIANCE MANAGEMENT in the left pane. In the
Appliance Settings page, the Update Repository Path is not changed to default path.
Resolution: In the Administration Console, manually copy the path in the Default Update Repository field to Update Repository Path
field.
After backup and restore of OpenManage Integration for
VMware vCenter, why alarm settings are not restored?
Restoring the OpenManage Integration for VMware vCenter appliance backup does not restore all the Alarm settings. However, in the
OpenManage Integration for VMware GUI, the Alarms and Events field displays the restored settings.
Resolution: In the OpenManage Integration for VMware GUI, in the Manage > Settings tab, manually change the Events and Alarms
settings.
116
Troubleshooting