Users Guide

NOTE: PCIe information is not applicable for M1000e chassis.
a. In the Overview tab, click PCIe.
b. In the Monitor tab, expand the left pane, click Hardware Inventory, and then click PCIe.
The following information is displayed:
• PCIe Slot
– Slot
– Name
– Power Status
– Fabric
• Server Slot
– Name
– Number
To view additional information, select the corresponding PCIe and following information is displayed:
• Slot Type
• Server Mapping
• Assignment Status
• Allocated Slot Power
• PCI ID
• Vendor ID
Viewing Hardware Inventory: Power Supplies
You can view information about the Power Supply Units for the selected chassis. To view the information on this page, you must run
an inventory job. You can export a CSV le of Power Supply Unit information.
To view information about the Power Supply Unit:
1. On the Home page, click vCenter.
2. In the left pane, under OpenManage Integration, click Dell Chassis.
3. In the left pane, select the corresponding chassis IP.
4. Click the Monitor tab.
5. To view information about the Power Supply Units, perform one of the following:
a. In the Overview tab, click Power Supplies.
b. In the Monitor tab, expand the left pane, click Hardware Inventory, and then click Power Supplies.
The following information is displayed:
• Name
• Capacity
• Present
• Power State
Viewing Hardware Inventory: Temperature Sensors
You can view information about temperature sensors for the selected chassis. To view the information on this page, you must run an
inventory job. You can export a CSV le of temperature sensors information.
67