Users Guide

Figure 1. Firmware link communication error
1. Open Microsoft Registry Editor (Regedit).
2. Navigate to the following location:
KHEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
3. Add a DWORD value for ReceiveTimeout.
4. Set the value to 30 seconds (30000) [This value may need to be a higher value in your environment].
5. Exit Regedit.
6. Restart Internet Explorer.
NOTE: Just opening a new Internet Explorer window is not enough. Restart the Internet Explorer browser.
What generation of Dell servers does the OpenManage Integration for VMware vCenter
congure and support for SNMP traps?
OpenManage Integration for VMware vCenter supports OMSA SNMP traps on pre-12th generation servers and iDRAC traps on 12th
generation servers.
What vCenters are managed by OpenManage Integration for VMware vCenter?
OpenManage Integration for VMware vCenter manages only registered vCenters in either linked mode or not in a linked mode also.
Does OpenManage Integration for VMware vCenter support vCenter in linked mode?
Yes , OpenManage Integration for VMware vCenter supports up to 10 vCenters either in a linked mode or not in a linked mode also.
For more information on how OpenManage Integration for VMware vCenter works in linked mode, see the white paper,
OpenManage Integration for VMware vCenter: Working in Linked Mode on www.Dell.com.
What are the Required Port Settings for the OpenManage Integration for VMware vCenter?
NOTE: When deploying the OMSA agent using the Fix non-complient vSphere hosts link available from the Compliance
window in the OpenManage Integration for VMware vCenter, the OpenManage Integration for VMware vCenter starts
the http Client service and enables port 8080 on releases after ESXI 5.0 to download OMSA VIB and install it. Once the
OMSA installation is completed the service automatically stops and the port is closed.
Use these port settings for the OpenManage Integration for VMware vCenter.
120