Setup Guide

c) In the Verify Password, text box, confirm the password.

3. To save the specified credentials and continue with the Configuration Wizard, click Save and Continue.

Setting The Default Firmware Update Repository

[Wizard]

Firmware repository settings contain the firmware catalog location used to update deployed servers. You can set up firmware initially here

in the wizard or later from the Dell Management Center Settings option. In addition, you can run the firmware update later from the

OpenManage Integration tab.

To set the default firmware update repository:

1. In the Configuration Wizard, on the Firmware Repository page, to choose the default repository for firmware updates, select one

of the following:

• Dell Online

Default firmware repository (ftp.dell.com) with a staging folder. The OpenManage Integration for VMware vCenter downloads

selected firmware updates and stores them in the staging folder, and then they are applied as necessary.

• Local/shared repository

These are created with the Dell Repository Manager application. These local repositories should be located on Windows-based file

shares.

2. If you selected Local/shared repository, do the following:

a) Enter the Catalog File Location using the following format:

• NFS share for xml file: host:/share/filename.xml

• NFS share for gz file: host/share/filename.gz

• CIFS share for xml file: \\host\share\filename.xml

• CIFS share for gz file: \\host\share\filename.gz

b) If using a CIFS share, enter the User Name, Password, and Verify Password; the passwords must match. These fields are only

active when entering a CIFS share.

NOTE:

The @ character is not supported for use in shared network folder user names/passwords.

c) To validate your entries click Begin Test.

3. To save this selection and continue the Configuration Wizard, click Save and Continue.

Enabling The OMSA Link [Wizard]

To launch OpenManage Server Administator (OMSA) within the OpenManage Integration for VMware vCenter virtual appliance, the

OMSA Web Server must be installed and configured. See the

Dell OpenManage Server Administrator Installation Guide for instructions on

how to install and configure the Web Server.

NOTE:

OMSA is only required on Dell servers prior to Dell PowerEdge 12th generation servers.

You can use OMSA to:

• Manage vCenter elements (detailed sensor/component-level health information).

• Clear command logs and system event logs (SELs).

• Obtain NIC statistics.

• Make sure that the OpenManage Integration for VMware vCenter captures events from a selected host.

1. In the Configuration Wizard, on the OpenManage Server Admin page, use the OMSA Web Server URL text box to enter the

OMSA URL. You must include the full URL including the HTTPS.

2. To save this URL and finish the Configuration Wizard, click Finish.

Configuring Dell iDRAC Auto-Discovery And Initial

Start-up

If you did not order your appliance with Auto-Discovery enabled from the factory manually.

Understanding How To Configure the OpenManage Integration for VMware vCenter Using the Wizard