Release Notes
server and BIOS settings pages and when you select a deployment template with an
affected hardware profile during deployment.
To resolve this issue, use one of the corresponding BIOS versions listed in Table 1 and
Table 2.
The web client support added in OpenManage Integration for VMware vCenter, version
2.0 requires vCenter Server 5.5 or later. Prior versions of vCenter are only supported
with the standard desktop client.
When restoring a backup from 1.7 to 2.0 and later, a Fully Qualified Domain Name
(FQDN) path must be provided. If only the directory path is specified, an error message
is displayed indicating that an incorrect path is entered.
Known Issues and Resolutions
The following section lists the open issues and resolutions with the OpenManage Integration for VMware
vCenter:
Issue 1: Memory data displays a negative value for a host after successful inventory.
Description: The Total Memory capacity displays as “0” and Memory Installable displays a
negative value on the Host Memory overview page. This issue occurs because of some issue in
the iDRAC.
Resolution/Workaround: Restart the system and check if the issue is resolved. If issue is not
resolved, you may have to reset the iDRAC.
Version Affected: All
Issue 2: Chassis and server health is displayed as warning on the Chassis Summary page when server
becomes critical.
Description: When a critical entry is made to SEL logs, the health of the server (blade) changes
to critical. This is correctly reflected on the Host Summary page. However, this is not
reflected on the Chassis Summary page. The server health is displayed as warning. If the
chassis was normal earlier, the health of the chassis also changes to warning.
Resolution/Workaround: None. This is a known defect in the RACADM. The defect will be fixed
in the next release of RACADM for Chassis.
Version Affected: 2.1
Issue 3: NTP settings are not applied after a restore from backup database.
Description: NTP settings are not applied after the restore from backup database.
Resolution/Workaround: After restoring the database, you must manually set the NTP settings.
Version Affected: All