White Papers

© 2021 Dell Inc. or its subsidiaries.
For details on other steps see the OpenManage Integration for Microsoft System Center Version 7.3 for Microsoft
Endpoint Configuration Manager and System Center Virtual Machine Manager Unified User’s Guide on the Dell Support
Website
Identifying and removing attributes with Pool Value in OT
Hardware configuration captured from reference servers may include few system specific attributes that are selected by
default which in turn requires to be provided with system specific values for each attribute in a CSV at deployment step
of the workflow. If these attributes are not required to be applied on the target servers, you can remove them before
deploying. The following sections provide details about identifying such attributes for a smoother deployment.
In this section we would identify and remove the Pool Value attributes which may not be required for provisioning.
Table 1 lists all pool value attributes that are selected by default in OT and not mandatory, along with information
on associated attribute group and hardware component.
Component
Attribute Group
Attribute Name (Display Name in CSV)
BIOS
Network Settings
ISCSI Initiator Name (IscsiInitiatorName)
BIOS
Connection 1 Settings
Initiator Gateway (IscsiDev1Con1Gateway)
BIOS
Connection 1 Settings
Initiator IP Address (IscsiDev1Con1Ip)
BIOS
Connection 1 Settings
Initiator Subnet Mask (IscsiDev1Con1Mask)
BIOS
Connection 1 Settings
Target IP Address (IscsiDev1Con1TargetIp)
BIOS
Connection 1 Settings
Target Name (IscsiDev1Con1TargetName)
BIOS
Connection 2 Settings
Initiator Gateway (IscsiDev1Con2Gateway)
BIOS
Connection 2 Settings
Initiator IP Address (IscsiDev1Con2Ip)
BIOS
Connection 2 Settings
Initiator Subnet Mask (IscsiDev1Con2Mask)
BIOS
Connection 2 Settings
Target IP Address (IscsiDev1Con2TargetIp)
BIOS
Connection 2 Settings
Target Name (IscsiDev1Con2TargetName)
iDRAC
Active Directory
Active Directory RAC Name (RacName)
iDRAC
Ipv4 Static Information
Ipv4 Address (Address)
iDRAC
Ipv4 Static Information
Net Mask (Netmask)
iDRAC
Ipv4 Static Information
Gateway (Gateway)
iDRAC
Ipv4 Static Information
DNS Server 1 (DNS1)
iDRAC
Ipv4 Static Information
DNS Server 2 (DNS2)
iDRAC
Ipv6 Static Information
Ipv6 Address 1 (Address1)
iDRAC
Ipv6 Static Information
Ipv6 Gateway (Gateway)
iDRAC
Ipv6 Static Information
IPV6 Link Local Prefix Length (PrefixLength)
iDRAC
Ipv6 Static Information
IPV6 DNS Server 1 (DNS1)
iDRAC
Ipv6 Static Information
Ipv6 DNS Server 2 (DNS2)
Table 1: Pool Value attributes in OT
NOTE: Additional to the above listed attributes, there are pool value attributes in OT that are unselected by default or
mandatory to be applied.
Unselecting Pool Value attributes in BIOS Component
1. Select BIOS component
2. Scroll down to attribute group Network Settings.
3. Identify and remove the attribute ISCSI Initiator Name as shown in Figure.1.