White Papers

© 2021 Dell Inc. or its subsidiaries.
• Attribute Description: Enables or disables the integrated network card (NDC) PCIe link. When set to
Disabled, the NDC link is not available to the operating system (OS).
NOTE: If set to Disabled (OS), the Integrated NIC may still be available for shared network access by
iDRAC.
14. Attribute Name: Integrated Network Card 1 PCIe Link2
• Attribute Group: Integrated Devices
• Attribute Name in CSV: Ndc1PcieLink2
• Attribute Description: "Enables or disables the integrated network card (NDC) PCIe link. When set to
Disabled, the NDC link is not available to the operating system (OS).
NOTE: If set to Disabled (OS), the Integrated NIC may still be available for shared network access by
iDRAC."
15. Attribute Name: Integrated Network Card 1 PCIe Link3
• Attribute Group: Integrated Devices
• Attribute Name in CSV: Ndc1PcieLink3
• Attribute Description: "Enables or disables the integrated network card (NDC) PCIe link. When set to
Disabled, the NDC link is not available to the operating system (OS).
NOTE: If set to Disabled (OS), the Integrated NIC may still be available for shared network access by
iDRAC."
Network Component
1. Attribute Name: CHAP Mutual Authentication
• Attribute Group: iSCSI General Parameters
• Attribute Name in CSV: ChapMutualAuth
• Attribute Description: To use mutual CHAP authentication, specify an initiator secret on the Initiator
Parameters page and configure that secret on the target.
2. Attribute Name: Connect (ConnectFirstTgt)
• Attribute Group: iSCSI First Target Parameters
• Attribute Name in CSV: ConnectFirstTgt
• Attribute Description: Setting to enable whether connection to the first target is attempted.
3. Attribute Name: Connect (ConnectSecondTgt)
• Attribute Group: iSCSI Second Target Parameters
• Attribute Name in CSV: (ConnectSecondTgt)
• Attribute Description: Setting to enable whether connection to the second target is attempted.
4. Attribute Name: Boot LUN
• Attribute Group: iSCSI First Target Parameters
• Attribute Name in CSV: FirstTgtBootLun
• Attribute Description: Specifies the first iSCSI target boot LUN.
5. Attribute Name: CHAP ID
• Attribute Group: iSCSI First Target Parameters
• Attribute Name in CSV: FirstTgtChapId
• Attribute Description: First Target CHAP ID (up to 128 characters in length). If only a single value of
CHAP ID supported then it is stored here.
6. Attribute Name: CHAP Secret
• Attribute Group: iSCSI First Target Parameters