Users Guide

Supported tasks on the SCOM console
Topics:
• Run Dell EMC Windows Server Agent-based and iDRAC7 or iDRAC8 SNMP Management Pack monitoring feature-based
tasks on SCOM
• Tasks run on Dell EMC devices by using the Dell EMC Windows Server Agent-based and iDRAC7 or iDRAC8 SNMP
Management Pack monitoring features
Run Dell EMC Windows Server Agent-based and
iDRAC7 or iDRAC8 SNMP Management Pack
monitoring feature-based tasks on SCOM
Steps
1. In the left pane of the SCOM console, select Monitoring.
2. Expand Dell EMC.
3. Expand either Diagram Views, State Views, or Alerts Views.
4. Select the device on which you want to run the task.
A list of tasks you can run by using the monitoring feature that is used by the device is displayed in the Tasks pane of the
SCOM console.
5. In the Tasks pane, click the task that you want to run.
The task is started, and after the task is successfully run, a summary of the task is displayed.
Results
NOTE: Some tasks have prerequisites to be successfully run.
Tasks run on Dell EMC devices by using the Dell EMC
Windows Server Agent-based and iDRAC7 or iDRAC8
SNMP Management Pack monitoring features
When you select a device or a component, the relevant tasks are displayed in the Tasks pane of SCOM. This is a list of the
tasks that you can run on Dell EMC devices by using different monitoring features of Dell EMC Windows Server Agent-based
and iDRAC7 or iDRAC8 SNMP Management Pack.
Table 5. Tasks run on Dell EMC devices by using the Dell EMC Windows Server Agent-based and iDRAC7
or iDRAC8 SNMP Management Pack monitoring features
Tasks run on the
SCOM console
Dell EMC Windows Server Agent-based and iDRAC7 or iDRAC8 SNMP Management Pack
monitoring features
Server and Rack Workstation monitoring
feature using OMSA
DRAC monitoring feature
Check Node Interface Yes Yes
Get Warranty
Information
- No
6
22 Supported tasks on the SCOM console